Simple test¶

Ensure your device works with this simple test.

examples/shtc3_simpletest.py¶

import time
from machine import Pin, I2C
from micropython_shtc3 import shtc3

i2c = I2C(1, sda=Pin(2), scl=Pin(3))  # Correct I2C pins for RP2040
sht = shtc3.SHTC3(i2c)

while True:
    temperature, relative_humidity = sht.measurements
    print("Temperature: {:0.1f} C".format(temperature))
    print("Humidity: {:0.1f} %%".format(relative_humidity))
    print()
    time.sleep(0.5)

Power mode settings¶

Example showing the Power mode setting

examples/shtc3_power_mode.py¶

import time
from machine import Pin, I2C
from micropython_shtc3 import shtc3

i2c = I2C(1, sda=Pin(2), scl=Pin(3))  # Correct I2C pins for RP2040
sht = shtc3.SHTC3(i2c)

sht.power_mode = shtc3.NORMAL

# After running this example you might need to power-off and on
# the sensor. If you try to use the sensor afterward you might get
# and EIO error

while True:
    for power_mode in shtc3.power_mode_values:
        print("Current Operation mode setting: ", sht.power_mode)
        for _ in range(10):
            temp = sht.temperature
            print("Temperature: {:.2f}C".format(temp))
            print()
            time.sleep(0.5)
        sht.power_mode = power_mode